Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Riding Jezebel] Frame Slider Design and Selection
#1
Crash protectors, crash bobbins, fairing protectors or frame sliders, all these products ultimately seek to do one thing - protect your expensive bodywork or the essential and often expensive structural parts of your motorcycle from damage in the even of a fall or tip-over. The idea behind these is that during a crash or tip over they take the brunt of the damage, keeping your expensive bike frame away from the pavement. They were originally used by racers, but became a common street-bike aftermarket install to protect fairings.

Digging around it seems people are split on whether or not adding frame sliders to your bike is a good idea. There are times when sliders do help: In driveway tip-overs and low speed crashes, frame sliders can reduce the amount of damage. But even with sliders in place, bars still get bent/broken and bodywork still gets scratched.  The downside is if the bike has any momentum and that slider catches on a curb, pothole, dirt, etc... then it can start flipping, doing major damage. On the other hand, the frame slider will create a gap between the pavement and your bike's fairings, so if your leg happens to be trapped in that not-so-awesome place, you'll be grateful to have those solid pucks taking the bike weight off your leg as you skid. If attached incorrectly, the frame slider's mount can shift, causing cracks in the fairing. By the same token, if your bike's stock turn signals protrude outward, they too will crack your fairing when they slide, acting the same way a frame slider would (so get flush mounts!). You need to decide if you think adding sliders to your bike will be beneficial to you. Some bikes have no good installation place for frame sliders and can cause more damage than good (like ending up cutting into the frame, for example, with the FZ6).

Cost:

Cost of the frame sliders must be appropriate to the items that they are designed to protect. Price is not necessarily the best indicator of quality. Poorly designed frame sliders made of the nicest shiniest materials may not serve their purpose as well as well designed but less 'bling' ones. Remember these things need to be able to withstand a great deal of shock on impact with the ground, without transferring that shock to the bike frame.

Mounting Configurations:

The frame slider must be designed to mount securely onto a strong enough part of the motorcycle so that impact forces can be adequately distributed or absorbed. Here are some popular mounting configurations. Fairing Mounted Frame Sliders Sliders that mount onto the fairing with small fairing screws may provide some protection in a minor tip-over but offer very minimal protection in a slide. These sliders are not generally recommended for serious riders. They also often require drilling a hole into the fairing, and are more likely to cause cracks in the event of a fall. Frame Mounted Sliders - Direct The most popular and viable mounting option is directly to a selected strong point of the frame. Sliders with this design offer the most protection and impact force distribution. The installation of this type of slider often require modification of the fairing and in some cases like the Honda VFR800, as extreme as requiring the modification of the coolant bottle. For this reason, many choose the first or the third option as fairing modification can at times be quite intimidating. This option is the most popular for serious sportsriders, amateur and semi-professional racers alike as they provide the best protection for the money. One other thing to consider when choosing these types of sliders is where they will be mounted to. Many models of sportbikes offer several places to mount them, frame slider manufacturers all have their personal reasons for choosing the mounting location for theirs and many of them make that choice for the wrong reasons. An example is cost - a location that offers a two short bolt mounting location is cheaper than one using a long through the engine bolt choice. The former being a much weaker location. If you own an SV650 you will know what that means. Another choice is the use of a bracket so that cutting of the fairing is avoided - see below (Frame Mounted Frame Sliders-Through-Engine Bolts). Frame Mounted Sliders - In-Direct To address some of the concerns owners may have about modification of the fairing, some manufacturers have opted for a design that allows for the slider to mount onto an offset bracket that then mounts onto the frame. This offset introduces a whole new set of variables into the mix. Depending on the degree of the offset, impact forces now include amplified torque stresses which will be applied to the frame mounting points. Offset brackets will need to be of beefier construction, but not so beefy as to stay intact during an impact while severely damaging the frame mounting points. This is often the most costly type of slider configuration as most brackets require ingenious CNC work and design. In some situations employment of a bracket is a calculated risk, in others it is just not feasible. No cut sliders are attractive to most bikers so do your homework and ask the manfacturer questions before you buy them. Frame Mounted Frame Sliders-Through-Engine Bolts The third mounting option found only on certain models of bikes like the Suzuki DL1000 Vstrom, TL1000S, SV650 and Ducati models of bikes allow for use of the long, through-the-engine mounting bolt. This method is by far the strongest available as impact forces are allowed to be distributed over a much larger area. This is also the second more costly design as these long bolts are quite expensive to manufacture. The design must be structurally strong enough not to break off when encountering the various types of impact forces but not so strong that these forces would be transmitted entirely to and damage the considerably more costly frame mounting points. In other words you want to sacrifice your slider before your fairing and then your frame in that order. It's a delicate balance and there is no sure way to ensure that any one design will accomplish this desired goal.

Frame Slider Material:

The choice of material used for the frame slider should be a balance of the following 3 requirements: Abrasion Resistance - the material should be hard enough to be able to slow the bike down in a slide and not be totally worn down to the bolt half way through a slide Structural Strength - the material should be strong but not brittle and snap off too easily on impact Energy Absorption- the material used should have some energy absorbing properties but not be so hard that all impact forces are transmitted to the mounting points or fasteners (solid steel or aluminum materials are examples of non-energy absorbing materials). Most high quality frame sliders today are made of some kind of nylon or other for energy absorption and with aluminum inserts for strengthening of the fastening points. The range of nylon types, with different levels of abrasion resistance and "brittleness" used is also quite varied.

Fasteners and Components:

Quality of materials used, aesthetics and quality of workmanship should also be considered when choosing the right frame slider for your bike. Look for high quality anodized steel bolts. Black non-coated bolts will rust in a week or less depending where you live. Stainless steel washers between your steel bolts and aluminum inserts in the slider also reduce potential corrosion problems. Socket head cap screws offer the smallest footprint allowing for a thicker and stronger slider dimensions and are generally much more expensive then regular hex-head screws. Nyloc lock nuts where applicable are another added safety feature. True, these are all minor considerations in the overall scheme of things but they all add up to the cost of manufacturing. One last thing to remember is to always try to use some form of thread lock compound like Loctite and to properly torque the mounting bolts to the manufacturer's recommendations. If you're not sure check out our torque reference guide.

CONCLUSION:

Where does that leave you the consumer? Well, we all don't want to think about the day when we will be able to justify the purchase of frame sliders. The reality is that as long as bikes have only two wheels, you can expect them to fall over sooner or later. Frame sliders are one of the surest and least expensive ways to ensure some protection for the expensive or sometimes irreplaceable parts of your bike. After all some protection is still better than none. Think about broken rear brake levers, gear shifters or even worse - punctured radiators or coolant bottles, when you're miles from civilization. The rule is the same no matter what you're spending your money on - buy the best you can afford and don't be afraid to ask the manufacturer why their product is better than the plethora of other brands available out there. Any good manufacturer will be very clear about what differentiates their products form others so that you will be able to make the correct purchase decision. Read reviews and check out what other people riding the same bike as you have installed, why, and how they stood up to a crash. NOTE: Read this post for info on choosing frame sliders for the Ninja 250.


Forum Jump:


Users browsing this thread: 2 Guest(s)